How To Recharge My Arlo Camera Battery

Download Article

Download Article

Arlo is a visitor that manufactures and sells home security cameras. The batteries on their devices are simple to recharge. The easiest way is connecting the camera to a wall outlet with an Arlo USB adapter. If yous want to charge multiple batteries at in one case, use an Arlo power station. If you get through all the necessary steps but your bombardment won't charge, there are a few troubleshooting options y'all tin try to successfully charge your camera.

1. ane

   Move the camera inside if you're using it outside. Even if you have a power outlet outside, don't accuse the battery outdoors. Bring it inside earlier plugging it in to accuse.^[1]

   • Choose a rubber spot to charge the camera where information technology won't be disturbed or stepped on. A countertop or table works best. Don't charge the camera on the floor unless it's an out of the fashion spot.

2. ii

   Plug the USB charging cablevision into the camera and wall power adapter. The charging cable has ii sides. The smaller side plugs into the back of the camera. Flip the camera around and detect the slot for the plug. Then plug the larger side of the cablevision into the wall adapter.^[2]

   • Just use Arlo products to charge the battery. Other power units and cables won't work and could impairment the camera or bombardment.

   Advertising

3. three

   Plug the wall power adapter into a wall socket. When the battery is connected properly, the LED light on the photographic camera blinks blue. Look for this blinking. Then get out the camera to charge.^[3]

   • If the blinking annoys yous, turn the photographic camera around or cover information technology with a towel while it charges.
   • If the light doesn't blink, bank check your connection. Brand certain all the plugs are fully inserted.

4. 4

   Unplug the photographic camera when the LED light turns solid blueish. When the bombardment is fully charged, the bluish light stops blinking and turns solid. Monitor the photographic camera and unplug it when you meet the solid blue light. Then reinstall the camera where it was originally.^[4]

   • Arlo camera batteries accept two-iv hours to charge, depending on how depression the battery was. Don't unplug information technology before the lite turns solid or you'll have an incomplete charge.

Advertisement

1. i

   Plug in the Arlo charging station. The charging station comes with a USB cable and a wall adapter. Plug the small side of the cable into the charging station and the large side into the adapter. Then plug the wall adapter into an outlet.^[5]

   • An Arlo power station comes separately from the cameras and base of operations stations. You can get one from an electronics shop or online. Remember that batteries aren't included with the power station. Yous merely get the charging port, cable, and wall power adapter.
   • Make certain the ability station is in a safe place where it won't get knocked over or stepped on.
   • Simply apply Arlo products to accuse the ability station. Other USB cables won't work properly.

2. 2

   Open the battery compartment on the camera. Look for a small latch on the top of the camera. Press the latch down with your finger to unlock the battery compartment. While holding the latch, use your other mitt to lift upwards the top part of the camera and reveal the battery.^[6]

   • Hold onto the camera firmly while opening the compartment. Information technology could slip out of your hands and break.

3. 3

   Press downward the latch holding the battery in place and slide it out. The bombardment is held in place with a modest latch. Press information technology downward to gratuitous the battery. Then slide the battery out of the compartment.^[7]

4. 4

   Slide the battery into the charging bay until it clicks. The power station has ii charging bays, 1 on each side. Take the battery and line it up with the grooves on the charger. Insert its dorsum side (the black function) into the bay. Press until you hear a click, meaning the bombardment is locked in place. ^[viii]

   • Make certain the Arlo symbol is facing up on the battery. That's how you know the battery is facing the right direction.
   • Insert another battery into the other side if yous want to charge 2 at the same time.

5. 5

   Get out the battery in until the LED light turns solid green. While the battery is charging, the LED light will exist solid xanthous. When it turns solid green, the battery is charged and you can remove it.^[9]

   • The power station has a light for each battery. Look at the light closest to the battery to brand sure y'all're checking the right one.
   • The battery will take ii-four hours to accuse, depending on how depression the charge was.
   • If the LED blinks yellow, it means the battery is inserted but isn't charging. Endeavour removing the battery and reinserting it, making sure the grooves are all lined up properly.

6. half dozen

   Remove the battery by pressing it until it clicks. The click ways the bombardment is free. So slide it out carefully and insert it dorsum into the camera.^[10]

   • Don't lift the power station when you remove the battery. It could autumn out and break.

Advertisement

1. 1

   Check that your attachments are tight. All the plugs you insert should be snug. If your battery won't charge, check each attachment. Brand sure the wall adapter is in the outlet, and the USB cable is continued to the adapter and charging unit of measurement.^[11]

   • Effort removing the cables and wiping off all the connection points with a dry rag. Sometimes dust prevents a proficient connection. So plug everything dorsum in.

2. 2

   Brand sure you're using Arlo equipment. The batteries and power station won't work without Arlo cables and adapters. Your best bet is using the equipment that came with your camera or ability station. These were manufactured and packaged past Arlo. If you lot bought pieces separately, look for the Arlo logo on them.^[12]

   • If you buy replacement cables and adapters from another seller, check for the Arlo logo on them. Also look for a lightning commodities logo, which is the QC 2.0 icon, and an output listed at 9V===1.1A. These are all indications of Arlo-approved adapters.
   • If you're using the aforementioned cables and adapters that came with your product, then the equipment may be defective. Contact Arlo for further aid or a replacement. Their 24-hour technical help number is (408) 638-3750, or you tin visit the Contact section on their website at https://world wide web.arlo.com/en-us/online-store/contact-us.aspx##targetText=For%20technical%20support%20or%20warranty,day%2C%207%20days%20a%20week.

3. iii

   Log into your Arlo account and come across if the charging icon is at that place. If you're trying to charge the battery and the LED isn't lighting upward, the light may be defective. Confirm if the camera is charging past logging into your Arlo account. If you see the charge icon on the homepage, the camera is charging. If not, then something is wrong with the connection.^[thirteen]

   • This choice only works if you're charging your battery while it's still in the camera. It won't work if you're using the ability station.

4. 4

   Reset your camera to its factory settings. Sometimes a software issue prevents the camera from charging. Take your Arlo base station and find the Reset button on the back. Press that button in with a pen or paperclip and concord information technology for 10 seconds. The LED will so wink yellow, and the system reboots. This resets the system to its default settings. When the LED turns solid green, set upward your photographic camera once again.^[14]

   • After the base station reboots, select New System Setup from your online Arlo account. Follow the steps to reconnect the camera to your WiFi.
   • If your battery still won't accuse, contact Arlo for further back up.

Advertisement

Ask a Question

200 characters left

Include your email address to become a message when this question is answered.

Submit

Advertisement

Cheers for submitting a tip for review!

Most This Article

Thanks to all authors for creating a page that has been read 15,698 times.

Did this article assistance you?

Source: https://www.wikihow.com/Charge-Arlo-Batteries

Posted by: harrisonriseed.blogspot.com

Share this post